Skip to main content
Peptide

Last updated: November 2026

Tesamorelin Dosage Calculator

Quick answer: Tesamorelin is measured in milligrams. A 5 mg vial mixed with 2 mL of water holds 2.5 mg/mL, so a 1 mg dose is 0.40 mL, which is 40 units on a U-100 insulin syringe.

Tesamorelin at a glance

Dose unitMilligrams (mg). Enter the dose in mg, not mcg.
Common vial sizesResearch vials: 2, 5 and 10 mg. The US-approved product comes in its own kit with the mixing liquid supplied.
How oftenOnce a day under the skin on the US label.
Mixing liquidThe label product uses the sterile water in its kit. Research vials are usually mixed with bacteriostatic water.
StorageFollow the storage section of the label for the product you have. A research vial mixed with bacteriostatic water goes in the fridge at 2–8 °C.
SyringeU-100 insulin syringe: 100 units = 1 mL, so each unit is 0.01 mL.

What this tesamorelin calculator does

Tesamorelin doses sit around one to two milligrams, which is large next to most peptides that are dosed in micrograms. That makes the water you add matter: the same 1 mg can be 20 units or 50 units depending on how much liquid is in the vial. The calculator divides the milligrams in your vial by the millilitres of water to get mg/mL, then divides your dose by that strength to give the draw in mL and U-100 units.

The page opens with Tesamorelin already selected, so the dose field is in mg and the quick-pick vial sizes match the vials sold. You can type any other vial size if yours differs.

How to use it

Read the milligrams on your vial label, then enter the amount of water you added when mixing it. Type your dose in mg, press Show result, and the syringe graphic fills to the units to draw. If you mixed the vial already and know its strength in mg/mL, choose the already-mixed option and enter that strength instead.

Worked examples

Example: 1 mg from a 5 mg vial with 2 mL of water

Vial: 5 mg

Water added: 2 mL

Strength: 5 ÷ 2 = 2.5 mg/mL

Draw = 1 ÷ 2.5 = 0.40 mL = 40 units

Example: 1.4 mg from a 10 mg vial with 2 mL of water

Vial: 10 mg

Water added: 2 mL

Strength: 10 ÷ 2 = 5 mg/mL

Draw = 1.4 ÷ 5 = 0.28 mL = 28 units

Tesamorelin draw table (U-100 syringe)

Units to draw for 1, 1.4 and 2 mg across common vial and water combinations:

Vial + waterConcentration1 mg dose1.4 mg dose2 mg dose
2 mg + 1 mL2 mg/mL50 units (0.5 mL)70 units (0.7 mL)100 units (1 mL)
5 mg + 2 mL2.5 mg/mL40 units (0.4 mL)56 units (0.56 mL)80 units (0.8 mL)
10 mg + 2 mL5 mg/mL20 units (0.2 mL)28 units (0.28 mL)40 units (0.4 mL)
10 mg + 3 mL3.333 mg/mL30 units (0.3 mL)42 units (0.42 mL)60 units (0.6 mL)

How many injections a tesamorelin vial gives

At one injection a day, the injection count is also the number of days a vial covers. Water does not change this number; only the vial size and the dose do.

Dose per injection2 mg vial5 mg vial10 mg vial
1 mg2 injections5 injections10 injections
1.4 mg1 injections3 injections7 injections
2 mg1 injections2 injections5 injections

Frequently asked questions

How many units is 1 mg of tesamorelin?
It depends on the strength of your vial. At 2.5 mg/mL (5 mg vial, 2 mL water) 1 mg is 0.40 mL = 40 units. At 5 mg/mL (10 mg vial, 2 mL water) it is 0.20 mL = 20 units on a U-100 syringe.
How much water do I add to a 5 mg tesamorelin vial?
There is no fixed amount for a research vial: the water only sets the strength. 1 mL gives 5 mg/mL, 2 mL gives 2.5 mg/mL and 2.5 mL gives 2 mg/mL. For the approved product, use the liquid and volume its label gives.
How many days does a 10 mg tesamorelin vial last?
At one injection a day, a 10 mg vial gives 7 injections at 1.4 mg, 10 at 1 mg and 5 at 2 mg. The water added does not change these counts.
Is tesamorelin measured in mg or mcg?
In milligrams. The label dose and the vials are both in mg, so enter the dose in mg. If a protocol gives mcg, divide by 1,000: 1,400 mcg = 1.4 mg.
How often is tesamorelin injected?
Once a day, under the skin, on the US label. The calculator works out one injection at a time, so the schedule only changes how long a vial lasts.

Other calculators

Related guides

How the tesamorelin numbers are worked out

Strength in mg/mL is the vial's milligrams divided by the water in millilitres. The draw in mL is your mg dose divided by that strength, and U-100 units are the mL figure times 100. Nothing you enter leaves your browser, and the result is arithmetic only: the dose itself comes from your prescriber or the product label.

References

  1. Bacteriostatic Water for Injection, USP — label (0.9% benzyl alcohol; for reconstitution) — FDA / DailyMed, 2024

Citations are provided for transparency and education. They do not imply the cited authors or bodies endorse this tool. Always confirm dosing with your prescriber.

Embed this on your site — get embed code →

Loved by the community

Sign in