Skip to main content
Peptide

Last updated: November 2026

Sermorelin Dosage Calculator

Quick answer: Sermorelin is dosed in micrograms. A 5 mg vial (5,000 mcg) mixed with 2.5 mL of bacteriostatic water holds 2,000 mcg/mL, so 300 mcg is 0.15 mL, or 15 units on a U-100 syringe.

Sermorelin at a glance

Dose unitMicrograms (mcg). 1 mg on the vial = 1,000 mcg.
Common vial sizesResearch vials: 5 and 10 mg. Pharmacy-mixed vials come in other sizes, so check your label.
How oftenOnce a day, usually at bedtime, under the skin. That was the schedule on the former US label.
Approval statusThe US brand product was withdrawn from sale in 2008. Sermorelin is now supplied by compounding pharmacies and as a research peptide.
StorageUnmixed powder: as the label says. After mixing with bacteriostatic water, keep the vial in the fridge at 2–8 °C and do not freeze it.
SyringeA 0.3 mL (30-unit) or 0.5 mL (50-unit) insulin syringe suits doses of a few hundred mcg.

Why sermorelin draws are small

Sermorelin doses are a few hundred micrograms, which is a tiny share of a 5 or 10 mg vial. With a strong mix the draw can drop below 10 units, where one unit either way is a large error. Adding more water spreads the same powder over more liquid, so each dose takes more units and is easier to read on the syringe.

This calculator starts with Sermorelin selected, so the dose field is in mcg and the vial pills are 5 and 10 mg. It converts the vial to mcg, divides by your water to get mcg/mL, then turns your dose into mL and U-100 units.

Using the calculator

Enter the vial size in mg from the label and the millilitres of bacteriostatic water you added. Set your dose in mcg and press Show result. The draw appears in units and mL, and the syringe graphic shows where to stop the plunger.

Worked examples

Example: 300 mcg from a 5 mg vial with 2.5 mL of water

Vial: 5 mg = 5,000 mcg

Water added: 2.5 mL

Strength: 5,000 ÷ 2.5 = 2,000 mcg/mL

Draw = 300 ÷ 2,000 = 0.15 mL = 15 units

Example: 200 mcg from a 10 mg vial with 5 mL of water

Vial: 10 mg = 10,000 mcg

Water added: 5 mL

Strength: 10,000 ÷ 5 = 2,000 mcg/mL

Draw = 200 ÷ 2,000 = 0.10 mL = 10 units

Sermorelin draw table (U-100 syringe)

Units for 100, 200, 300 and 500 mcg with common mixes:

Vial + waterConcentration100 mcg dose200 mcg dose300 mcg dose500 mcg dose
5 mg + 2 mL2,500 mcg/mL4 units (0.04 mL)8 units (0.08 mL)12 units (0.12 mL)20 units (0.2 mL)
5 mg + 2.5 mL2,000 mcg/mL5 units (0.05 mL)10 units (0.1 mL)15 units (0.15 mL)25 units (0.25 mL)
5 mg + 5 mL1,000 mcg/mL10 units (0.1 mL)20 units (0.2 mL)30 units (0.3 mL)50 units (0.5 mL)
10 mg + 5 mL2,000 mcg/mL5 units (0.05 mL)10 units (0.1 mL)15 units (0.15 mL)25 units (0.25 mL)

Nights per sermorelin vial

With one bedtime injection, each injection is one night. The count depends on vial size and dose only.

Dose per injection5 mg vial10 mg vial
100 mcg50 injections100 injections
200 mcg25 injections50 injections
300 mcg16 injections33 injections
500 mcg10 injections20 injections

Frequently asked questions

How many units is 300 mcg of sermorelin?
With 2,000 mcg/mL (5 mg vial plus 2.5 mL, or 10 mg plus 5 mL) it is 0.15 mL = 15 units. With 2,500 mcg/mL (5 mg plus 2 mL) it is 12 units.
How much bacteriostatic water for 5 mg of sermorelin?
Any volume works for the maths; it only sets the strength. 2 mL gives 2,500 mcg/mL, 2.5 mL gives 2,000 mcg/mL and 5 mL gives 1,000 mcg/mL. More water makes small doses easier to measure.
How long does a 10 mg vial of sermorelin last?
It holds 10,000 mcg, so at 300 mcg a night it gives 33 injections; at 200 mcg it gives 50.
When is sermorelin injected?
The former US label gave it once a day at bedtime, under the skin. Most sermorelin schedules still follow that once-nightly timing.
Does mixed sermorelin need to go in the fridge?
Yes. After mixing with bacteriostatic water, keep the vial at 2–8 °C and do not freeze it. Follow any shorter use-by date on your pharmacy label.

Other calculators

Related guides

Behind the sermorelin result

The vial's mg figure is multiplied by 1,000 to get mcg, then divided by the water volume for mcg/mL. Your dose divided by mcg/mL is the draw in mL; times 100 gives units on a U-100 syringe. The maths runs in your browser and does not set or suggest a dose.

References

  1. Bacteriostatic Water for Injection, USP — label (0.9% benzyl alcohol; for reconstitution) — FDA / DailyMed, 2024

Citations are provided for transparency and education. They do not imply the cited authors or bodies endorse this tool. Always confirm dosing with your prescriber.

Embed this on your site — get embed code →

Loved by the community

Sign in