Last updated: November 2026
TB-500 Dosage Calculator
Quick answer: TB-500 is dosed in milligrams. A 5 mg vial mixed with 2 mL of bacteriostatic water holds 2.5 mg/mL, so a 2.5 mg dose is 1.0 mL, which is 100 units: a full 1 mL U-100 syringe.
TB-500 at a glance
| What it is | The research name for synthetic thymosin beta-4 peptides. Not approved as a medicine anywhere. |
|---|---|
| Dose unit | Milligrams (mg), unlike BPC-157, which is dosed in mcg. |
| Common vial sizes | 2, 5 and 10 mg. |
| How often | Research protocols are usually written per week, for example two injections a week, rather than daily. |
| Storage | Keep the powder cold and dry. After mixing with bacteriostatic water, store the vial in the fridge at 2–8 °C. |
| Syringe | Milligram doses can fill a whole 1 mL (100-unit) syringe, so check the draw before you mix. |
Big doses and small syringes
TB-500 is one of the few peptides dosed in whole milligrams. A 2.5 mg dose from a 5 mg vial is half the vial, so the draw is half of whatever water you added. Mix that vial with 3 mL and the dose is 1.5 mL, which does not fit in a 1 mL insulin syringe. Using less water makes the liquid stronger and the draw smaller.
The calculator opens on TB-500 with the dose field in mg. When a dose needs more than the syringe you picked, the result warns you, so you can change the water before mixing.
Steps
Type the vial size in mg and the water you added or plan to add. Enter the dose in mg and press Show result to see the mL and units. Try a smaller water figure if the draw comes out above 100 units.
Worked examples
Vial: 5 mg
Water added: 1 mL
Strength: 5 ÷ 1 = 5 mg/mL
Draw = 2 ÷ 5 = 0.40 mL = 40 units
Vial: 10 mg
Water added: 2 mL
Strength: 10 ÷ 2 = 5 mg/mL
Draw = 2.5 ÷ 5 = 0.50 mL = 50 units
TB-500 draw table (U-100 syringe)
Units for 2, 2.5 and 5 mg. Cells above 100 units need more than one 1 mL syringe or a stronger mix:
| Vial + water | Concentration | 2 mg dose | 2.5 mg dose | 5 mg dose |
|---|---|---|---|---|
| 2 mg + 1 mL | 2 mg/mL | 100 units (1 mL) | 125 units (1.25 mL, more than a 1 mL syringe) | 250 units (2.5 mL, more than a 1 mL syringe) |
| 5 mg + 1 mL | 5 mg/mL | 40 units (0.4 mL) | 50 units (0.5 mL) | 100 units (1 mL) |
| 5 mg + 2 mL | 2.5 mg/mL | 80 units (0.8 mL) | 100 units (1 mL) | 200 units (2 mL, more than a 1 mL syringe) |
| 10 mg + 2 mL | 5 mg/mL | 40 units (0.4 mL) | 50 units (0.5 mL) | 100 units (1 mL) |
| 10 mg + 3 mL | 3.333 mg/mL | 60 units (0.6 mL) | 75 units (0.75 mL) | 150 units (1.5 mL, more than a 1 mL syringe) |
Injections per TB-500 vial
At two injections a week, divide the injection count by two for the number of weeks.
| Dose per injection | 2 mg vial | 5 mg vial | 10 mg vial |
|---|---|---|---|
| 2 mg | 1 injections | 2 injections | 5 injections |
| 2.5 mg | 0 injections | 2 injections | 4 injections |
| 5 mg | 0 injections | 1 injections | 2 injections |
Frequently asked questions
Other calculators
Related guides
The TB-500 formula
mg/mL = vial mg ÷ water mL. Draw (mL) = dose mg ÷ mg/mL. Units = mL × 100 on a U-100 syringe. A draw over the syringe size is flagged rather than rounded down. All of it runs locally in the browser, and none of it is dosing advice.
References
- Bacteriostatic Water for Injection, USP — label (0.9% benzyl alcohol; for reconstitution) — FDA / DailyMed, 2024
Citations are provided for transparency and education. They do not imply the cited authors or bodies endorse this tool. Always confirm dosing with your prescriber.