Last updated: November 2026
AOD-9604 Dosage Calculator
Quick answer: AOD-9604 is dosed in micrograms. A 5 mg vial (5,000 mcg) mixed with 2 mL of bacteriostatic water is 2,500 mcg/mL, so 300 mcg is 0.12 mL, or 12 units on a U-100 syringe.
AOD-9604 at a glance
| What it is | A modified fragment of the growth hormone molecule (the 176–191 region). A research peptide with no approved injectable use. |
|---|---|
| Dose unit | Micrograms (mcg). The vial is labelled in mg: 2 mg = 2,000 mcg, 5 mg = 5,000 mcg. |
| Common vial sizes | 2 and 5 mg. |
| How often | No approved schedule exists. Community protocols are usually written as one injection a day. |
| Storage | Powder: cold and away from light. Mixed with bacteriostatic water: fridge at 2–8 °C, never frozen. |
| Syringe | Doses of a few hundred mcg fit a 0.3 mL (30-unit) insulin syringe at most mixes. |
Same dose, different vial
The 2 mg and 5 mg vials hold very different amounts, so the same water gives very different strengths. With 2 mL in each, a 2 mg vial is 1,000 mcg/mL and a 5 mg vial is 2,500 mcg/mL. A 300 mcg dose is then 30 units from the small vial but 12 units from the large one. Mixing up the two vials is the most common reason a dose looks wrong, so enter the size printed on the label every time.
The calculator opens on AOD-9604, with mcg doses and 2 and 5 mg vial pills ready.
Using this page
Choose the vial size, enter the water you added, set the dose in mcg and press Show result. You get the draw in mL and in units, plus a syringe picture to match against your syringe markings.
Worked examples
Vial: 2 mg = 2,000 mcg
Water added: 2 mL
Strength: 2,000 ÷ 2 = 1,000 mcg/mL
Draw = 300 ÷ 1,000 = 0.30 mL = 30 units
Vial: 5 mg = 5,000 mcg
Water added: 2.5 mL
Strength: 5,000 ÷ 2.5 = 2,000 mcg/mL
Draw = 250 ÷ 2,000 = 0.125 mL = 12.5 units
AOD-9604 draw table (U-100 syringe)
Units for 250, 300 and 500 mcg:
| Vial + water | Concentration | 250 mcg dose | 300 mcg dose | 500 mcg dose |
|---|---|---|---|---|
| 2 mg + 1 mL | 2,000 mcg/mL | 12.5 units (0.125 mL) | 15 units (0.15 mL) | 25 units (0.25 mL) |
| 2 mg + 2 mL | 1,000 mcg/mL | 25 units (0.25 mL) | 30 units (0.3 mL) | 50 units (0.5 mL) |
| 5 mg + 2 mL | 2,500 mcg/mL | 10 units (0.1 mL) | 12 units (0.12 mL) | 20 units (0.2 mL) |
| 5 mg + 2.5 mL | 2,000 mcg/mL | 12.5 units (0.125 mL) | 15 units (0.15 mL) | 25 units (0.25 mL) |
| 5 mg + 3 mL | 1,667 mcg/mL | 15 units (0.15 mL) | 18 units (0.18 mL) | 30 units (0.3 mL) |
Days per AOD-9604 vial
At one injection a day, each injection below is one day:
| Dose per injection | 2 mg vial | 5 mg vial |
|---|---|---|
| 250 mcg | 8 injections | 20 injections |
| 300 mcg | 6 injections | 16 injections |
| 500 mcg | 4 injections | 10 injections |
Frequently asked questions
Other calculators
Related guides
How AOD-9604 units are calculated
Vial mg × 1,000 = vial mcg. Vial mcg ÷ water mL = mcg/mL. Dose mcg ÷ mcg/mL = mL to draw, and mL × 100 = U-100 units. It is plain arithmetic run in your browser; it does not recommend a dose.
References
- Bacteriostatic Water for Injection, USP — label (0.9% benzyl alcohol; for reconstitution) — FDA / DailyMed, 2024
Citations are provided for transparency and education. They do not imply the cited authors or bodies endorse this tool. Always confirm dosing with your prescriber.